From a48e2dc506753c357d2c01fe1526bb233cad71cd Mon Sep 17 00:00:00 2001 From: Till Hoeppner Date: Mon, 20 Apr 2015 12:20:33 +0200 Subject: Seperate commands section from RFC 2812 for easier parsing --- rfc2812_commands.txt | 1540 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1540 insertions(+) create mode 100644 rfc2812_commands.txt diff --git a/rfc2812_commands.txt b/rfc2812_commands.txt new file mode 100644 index 0000000..8971db5 --- /dev/null +++ b/rfc2812_commands.txt @@ -0,0 +1,1540 @@ +3.1.1 Password message + + Command: PASS + Parameters: + + The PASS command is used to set a 'connection password'. The + optional password can and MUST be set before any attempt to register + the connection is made. Currently this requires that user send a + PASS command before sending the NICK/USER combination. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_ALREADYREGISTRED + + Example: + + PASS secretpasswordhere + +3.1.2 Nick message + + + Command: NICK + Parameters: + + NICK command is used to give user a nickname or change the existing + one. + + Numeric Replies: + + ERR_NONICKNAMEGIVEN ERR_ERRONEUSNICKNAME + ERR_NICKNAMEINUSE ERR_NICKCOLLISION + ERR_UNAVAILRESOURCE ERR_RESTRICTED + + Examples: + + NICK Wiz ; Introducing new nick "Wiz" if session is + still unregistered, or user changing his + nickname to "Wiz" + + :WiZ!jto@tolsun.oulu.fi NICK Kilroy + ; Server telling that WiZ changed his + nickname to Kilroy. + +3.1.3 User message + + Command: USER + Parameters: + + The USER command is used at the beginning of connection to specify + the username, hostname and realname of a new user. + + The parameter should be a numeric, and can be used to + automatically set user modes when registering with the server. This + parameter is a bitmask, with only 2 bits having any signification: if + the bit 2 is set, the user mode 'w' will be set and if the bit 3 is + set, the user mode 'i' will be set. (See Section 3.1.5 "User + Modes"). + + The may contain space characters. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_ALREADYREGISTRED + + Example: + + USER guest 0 * :Ronnie Reagan ; User registering themselves with a + username of "guest" and real name + "Ronnie Reagan". + + USER guest 8 * :Ronnie Reagan ; User registering themselves with a + username of "guest" and real name + "Ronnie Reagan", and asking to be set + invisible. + +3.1.4 Oper message + + Command: OPER + Parameters: + + A normal user uses the OPER command to obtain operator privileges. + The combination of and are REQUIRED to gain + Operator privileges. Upon success, the user will receive a MODE + message (see section 3.1.5) indicating the new user modes. + + Numeric Replies: + + ERR_NEEDMOREPARAMS RPL_YOUREOPER + ERR_NOOPERHOST ERR_PASSWDMISMATCH + + Example: + + OPER foo bar ; Attempt to register as an operator + using a username of "foo" and "bar" + as the password. + +3.1.5 User mode message + + Command: MODE + Parameters: + *( ( "+" / "-" ) *( "i" / "w" / "o" / "O" / "r" ) ) + + The user MODE's are typically changes which affect either how the + client is seen by others or what 'extra' messages the client is sent. + + A user MODE command MUST only be accepted if both the sender of the + message and the nickname given as a parameter are both the same. If + no other parameter is given, then the server will return the current + settings for the nick. + + The available modes are as follows: + + a - user is flagged as away; + i - marks a users as invisible; + w - user receives wallops; + r - restricted user connection; + o - operator flag; + O - local operator flag; + s - marks a user for receipt of server notices. + + Additional modes may be available later on. + + The flag 'a' SHALL NOT be toggled by the user using the MODE command, + instead use of the AWAY command is REQUIRED. + + If a user attempts to make themselves an operator using the "+o" or + "+O" flag, the attempt SHOULD be ignored as users could bypass the + authentication mechanisms of the OPER command. There is no + restriction, however, on anyone `deopping' themselves (using "-o" or + "-O"). + + On the other hand, if a user attempts to make themselves unrestricted + using the "-r" flag, the attempt SHOULD be ignored. There is no + restriction, however, on anyone `deopping' themselves (using "+r"). + This flag is typically set by the server upon connection for + administrative reasons. While the restrictions imposed are left up + to the implementation, it is typical that a restricted user not be + allowed to change nicknames, nor make use of the channel operator + status on channels. + + The flag 's' is obsolete but MAY still be used. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_USERSDONTMATCH + ERR_UMODEUNKNOWNFLAG RPL_UMODEIS + + Examples: + + MODE WiZ -w ; Command by WiZ to turn off + reception of WALLOPS messages. + + MODE Angel +i ; Command from Angel to make herself + invisible. + + MODE WiZ -o ; WiZ 'deopping' (removing operator + status). + +3.1.6 Service message + + Command: SERVICE + Parameters: + + + The SERVICE command to register a new service. Command parameters + specify the service nickname, distribution, type and info of a new + service. + + The parameter is used to specify the visibility of a + service. The service may only be known to servers which have a name + matching the distribution. For a matching server to have knowledge + of the service, the network path between that server and the server + on which the service is connected MUST be composed of servers which + names all match the mask. + + The parameter is currently reserved for future usage. + + Numeric Replies: + + ERR_ALREADYREGISTRED ERR_NEEDMOREPARAMS + ERR_ERRONEUSNICKNAME + RPL_YOURESERVICE RPL_YOURHOST + RPL_MYINFO + + Example: + + SERVICE dict * *.fr 0 0 :French Dictionary ; Service registering + itself with a name of "dict". This + service will only be available on + servers which name matches "*.fr". + +3.1.7 Quit + + Command: QUIT + Parameters: [ ] + + A client session is terminated with a quit message. The server + acknowledges this by sending an ERROR message to the client. + + Numeric Replies: + + None. + + Example: + + QUIT :Gone to have lunch ; Preferred message format. + + :syrk!kalt@millennium.stealth.net QUIT :Gone to have lunch ; User + syrk has quit IRC to have lunch. + +3.1.8 Squit + + Command: SQUIT + Parameters: + + The SQUIT command is available only to operators. It is used to + disconnect server links. Also servers can generate SQUIT messages on + error conditions. A SQUIT message may also target a remote server + connection. In this case, the SQUIT message will simply be sent to + the remote server without affecting the servers in between the + operator and the remote server. + + The SHOULD be supplied by all operators who execute a SQUIT + for a remote server. The server ordered to disconnect its peer + generates a WALLOPS message with included, so that other + users may be aware of the reason of this action. + + Numeric replies: + + ERR_NOPRIVILEGES ERR_NOSUCHSERVER + ERR_NEEDMOREPARAMS + + Examples: + + SQUIT tolsun.oulu.fi :Bad Link ? ; Command to uplink of the server + tolson.oulu.fi to terminate its + connection with comment "Bad Link". + + :Trillian SQUIT cm22.eng.umd.edu :Server out of control ; Command + from Trillian from to disconnect + "cm22.eng.umd.edu" from the net with + comment "Server out of control". + +3.2 Channel operations + + This group of messages is concerned with manipulating channels, their + properties (channel modes), and their contents (typically users). + For this reason, these messages SHALL NOT be made available to + services. + + All of these messages are requests which will or will not be granted + by the server. The server MUST send a reply informing the user + whether the request was granted, denied or generated an error. When + the server grants the request, the message is typically sent back + (eventually reformatted) to the user with the prefix set to the user + itself. + + The rules governing how channels are managed are enforced by the + servers. These rules are beyond the scope of this document. More + details are found in "Internet Relay Chat: Channel Management" [IRC- + CHAN]. + +3.2.1 Join message + + Command: JOIN + Parameters: ( *( "," ) [ *( "," ) ] ) + / "0" + + The JOIN command is used by a user to request to start listening to + the specific channel. Servers MUST be able to parse arguments in the + form of a list of target, but SHOULD NOT use lists when sending JOIN + messages to clients. + + Once a user has joined a channel, he receives information about + all commands his server receives affecting the channel. This + includes JOIN, MODE, KICK, PART, QUIT and of course PRIVMSG/NOTICE. + This allows channel members to keep track of the other channel + members, as well as channel modes. + + If a JOIN is successful, the user receives a JOIN message as + confirmation and is then sent the channel's topic (using RPL_TOPIC) and + the list of users who are on the channel (using RPL_NAMREPLY), which + MUST include the user joining. + + Note that this message accepts a special argument ("0"), which is + a special request to leave all channels the user is currently a member + of. The server will process this message as if the user had sent + a PART command (See Section 3.2.2) for each channel he is a member + of. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_BANNEDFROMCHAN + ERR_INVITEONLYCHAN ERR_BADCHANNELKEY + ERR_CHANNELISFULL ERR_BADCHANMASK + ERR_NOSUCHCHANNEL ERR_TOOMANYCHANNELS + ERR_TOOMANYTARGETS ERR_UNAVAILRESOURCE + RPL_TOPIC + + Examples: + + JOIN #foobar ; Command to join channel #foobar. + + JOIN &foo fubar ; Command to join channel &foo using + key "fubar". + + JOIN #foo,&bar fubar ; Command to join channel #foo using + key "fubar" and &bar using no key. + + JOIN #foo,#bar fubar,foobar ; Command to join channel #foo using + key "fubar", and channel #bar using + key "foobar". + + JOIN #foo,#bar ; Command to join channels #foo and + #bar. + + JOIN 0 ; Leave all currently joined + channels. + + :WiZ!jto@tolsun.oulu.fi JOIN #Twilight_zone ; JOIN message from WiZ + on channel #Twilight_zone + +3.2.2 Part message + + Command: PART + Parameters: *( "," ) [ ] + + The PART command causes the user sending the message to be removed + from the list of active members for all given channels listed in the + parameter string. If a "Part Message" is given, this will be sent + instead of the default message, the nickname. This request is always + granted by the server. + + Servers MUST be able to parse arguments in the form of a list of + target, but SHOULD NOT use lists when sending PART messages to + clients. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOSUCHCHANNEL + ERR_NOTONCHANNEL + + Examples: + + PART #twilight_zone ; Command to leave channel + "#twilight_zone" + + PART #oz-ops,&group5 ; Command to leave both channels + "&group5" and "#oz-ops". + + :WiZ!jto@tolsun.oulu.fi PART #playzone :I lost + ; User WiZ leaving channel + "#playzone" with the message "I + lost". + +3.2.3 Channel mode message + + Command: MODE + Parameters: *( ( "-" / "+" ) * * ) + + The MODE command is provided so that users may query and change the + characteristics of a channel. For more details on available modes + and their uses, see "Internet Relay Chat: Channel Management" [IRC- + CHAN]. Note that there is a maximum limit of three (3) changes per + command for modes that take a parameter. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_KEYSET + ERR_NOCHANMODES ERR_CHANOPRIVSNEEDED + ERR_USERNOTINCHANNEL ERR_UNKNOWNMODE + RPL_CHANNELMODEIS + RPL_BANLIST RPL_ENDOFBANLIST + RPL_EXCEPTLIST RPL_ENDOFEXCEPTLIST + RPL_INVITELIST RPL_ENDOFINVITELIST + RPL_UNIQOPIS + + The following examples are given to help understanding the syntax of + the MODE command, but refer to modes defined in "Internet Relay Chat: + Channel Management" [IRC-CHAN]. + + Examples: + + MODE #Finnish +imI *!*@*.fi ; Command to make #Finnish channel + moderated and 'invite-only' with user + with a hostname matching *.fi + automatically invited. + + MODE #Finnish +o Kilroy ; Command to give 'chanop' privileges + to Kilroy on channel #Finnish. + + MODE #Finnish +v Wiz ; Command to allow WiZ to speak on + #Finnish. + + MODE #Fins -s ; Command to remove 'secret' flag + from channel #Fins. + + MODE #42 +k oulu ; Command to set the channel key to + "oulu". + + MODE #42 -k oulu ; Command to remove the "oulu" + channel key on channel "#42". + + MODE #eu-opers +l 10 ; Command to set the limit for the + number of users on channel + "#eu-opers" to 10. + + :WiZ!jto@tolsun.oulu.fi MODE #eu-opers -l + ; User "WiZ" removing the limit for + the number of users on channel "#eu- + opers". + + MODE &oulu +b ; Command to list ban masks set for + the channel "&oulu". + + MODE &oulu +b *!*@* ; Command to prevent all users from + joining. + + MODE &oulu +b *!*@*.edu +e *!*@*.bu.edu + ; Command to prevent any user from a + hostname matching *.edu from joining, + except if matching *.bu.edu + + MODE #bu +be *!*@*.edu *!*@*.bu.edu + ; Comment to prevent any user from a + hostname matching *.edu from joining, + except if matching *.bu.edu + + MODE #meditation e ; Command to list exception masks set + for the channel "#meditation". + + MODE #meditation I ; Command to list invitations masks + set for the channel "#meditation". + + MODE !12345ircd O ; Command to ask who the channel + creator for "!12345ircd" is + +3.2.4 Topic message + + Command: TOPIC + Parameters: [ ] + + The TOPIC command is used to change or view the topic of a channel. + The topic for channel is returned if there is no + given. If the parameter is present, the topic for that + channel will be changed, if this action is allowed for the user + requesting it. If the parameter is an empty string, the + topic for that channel will be removed. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOTONCHANNEL + RPL_NOTOPIC RPL_TOPIC + ERR_CHANOPRIVSNEEDED ERR_NOCHANMODES + + Examples: + + :WiZ!jto@tolsun.oulu.fi TOPIC #test :New topic ; User Wiz setting the + topic. + + TOPIC #test :another topic ; Command to set the topic on #test + to "another topic". + + TOPIC #test : ; Command to clear the topic on + #test. + + TOPIC #test ; Command to check the topic for + #test. + +3.2.5 Names message + + Command: NAMES + Parameters: [ *( "," ) [ ] ] + + By using the NAMES command, a user can list all nicknames that are + visible to him. For more details on what is visible and what is not, + see "Internet Relay Chat: Channel Management" [IRC-CHAN]. The + parameter specifies which channel(s) to return information + about. There is no error reply for bad channel names. + + If no parameter is given, a list of all channels and their + occupants is returned. At the end of this list, a list of users who + are visible but either not on any channel or not on a visible channel + are listed as being on `channel' "*". + + If the parameter is specified, the request is forwarded to + that server which will generate the reply. + + Wildcards are allowed in the parameter. + + Numerics: + + ERR_TOOMANYMATCHES ERR_NOSUCHSERVER + RPL_NAMREPLY RPL_ENDOFNAMES + + Examples: + + NAMES #twilight_zone,#42 ; Command to list visible users on + #twilight_zone and #42 + + NAMES ; Command to list all visible + channels and users + +3.2.6 List message + + Command: LIST + Parameters: [ *( "," ) [ ] ] + + The list command is used to list channels and their topics. If the + parameter is used, only the status of that channel is + displayed. + + If the parameter is specified, the request is forwarded to + that server which will generate the reply. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_TOOMANYMATCHES ERR_NOSUCHSERVER + RPL_LIST RPL_LISTEND + + Examples: + + LIST ; Command to list all channels. + + LIST #twilight_zone,#42 ; Command to list channels + #twilight_zone and #42 + +3.2.7 Invite message + + Command: INVITE + Parameters: + + The INVITE command is used to invite a user to a channel. The + parameter is the nickname of the person to be invited to + the target channel . There is no requirement that the + channel the target user is being invited to must exist or be a valid + channel. However, if the channel exists, only members of the channel + are allowed to invite other users. When the channel has invite-only + flag set, only channel operators may issue INVITE command. + + Only the user inviting and the user being invited will receive + notification of the invitation. Other channel members are not + notified. (This is unlike the MODE changes, and is occasionally the + source of trouble for users.) + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOSUCHNICK + ERR_NOTONCHANNEL ERR_USERONCHANNEL + ERR_CHANOPRIVSNEEDED + RPL_INVITING RPL_AWAY + + Examples: + + :Angel!wings@irc.org INVITE Wiz #Dust + + ; Message to WiZ when he has been + invited by user Angel to channel + #Dust + + INVITE Wiz #Twilight_Zone ; Command to invite WiZ to + #Twilight_zone + +3.2.8 Kick command + + Command: KICK + Parameters: *( "," ) *( "," ) + [] + + The KICK command can be used to request the forced removal of a user + from a channel. It causes the to PART from the by + force. For the message to be syntactically correct, there MUST be + either one channel parameter and multiple user parameter, or as many + channel parameters as there are user parameters. If a "comment" is + given, this will be sent instead of the default message, the nickname + of the user issuing the KICK. + + The server MUST NOT send KICK messages with multiple channels or + users to clients. This is necessarily to maintain backward + compatibility with old client software. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOSUCHCHANNEL + ERR_BADCHANMASK ERR_CHANOPRIVSNEEDED + ERR_USERNOTINCHANNEL ERR_NOTONCHANNEL + + Examples: + + KICK &Melbourne Matthew ; Command to kick Matthew from + &Melbourne + + KICK #Finnish John :Speaking English + ; Command to kick John from #Finnish + using "Speaking English" as the + reason (comment). + + :WiZ!jto@tolsun.oulu.fi KICK #Finnish John + ; KICK message on channel #Finnish + from WiZ to remove John from channel + +3.3 Sending messages + + The main purpose of the IRC protocol is to provide a base for clients + to communicate with each other. PRIVMSG, NOTICE and SQUERY + (described in Section 3.5 on Service Query and Commands) are the only + messages available which actually perform delivery of a text message + from one client to another - the rest just make it possible and try + to ensure it happens in a reliable and structured manner. + +3.3.1 Private messages + + Command: PRIVMSG + Parameters: + + PRIVMSG is used to send private messages between users, as well as to + send messages to channels. is usually the nickname of + the recipient of the message, or a channel name. + + The parameter may also be a host mask (#) or server + mask ($). In both cases the server will only send the PRIVMSG + to those who have a server or host matching the mask. The mask MUST + have at least 1 (one) "." in it and no wildcards following the last + ".". This requirement exists to prevent people sending messages to + "#*" or "$*", which would broadcast to all users. Wildcards are the + '*' and '?' characters. This extension to the PRIVMSG command is + only available to operators. + + Numeric Replies: + + ERR_NORECIPIENT ERR_NOTEXTTOSEND + ERR_CANNOTSENDTOCHAN ERR_NOTOPLEVEL + ERR_WILDTOPLEVEL ERR_TOOMANYTARGETS + ERR_NOSUCHNICK + RPL_AWAY + + Examples: + + :Angel!wings@irc.org PRIVMSG Wiz :Are you receiving this message ? + ; Message from Angel to Wiz. + + PRIVMSG Angel :yes I'm receiving it ! + ; Command to send a message to Angel. + + PRIVMSG jto@tolsun.oulu.fi :Hello ! + ; Command to send a message to a user + on server tolsun.oulu.fi with + username of "jto". + + PRIVMSG kalt%millennium.stealth.net@irc.stealth.net :Are you a frog? + ; Message to a user on server + irc.stealth.net with username of + "kalt", and connected from the host + millennium.stealth.net. + + PRIVMSG kalt%millennium.stealth.net :Do you like cheese? + ; Message to a user on the local + server with username of "kalt", and + connected from the host + millennium.stealth.net. + + PRIVMSG Wiz!jto@tolsun.oulu.fi :Hello ! + ; Message to the user with nickname + Wiz who is connected from the host + tolsun.oulu.fi and has the username + "jto". + + PRIVMSG $*.fi :Server tolsun.oulu.fi rebooting. + ; Message to everyone on a server + which has a name matching *.fi. + + PRIVMSG #*.edu :NSFNet is undergoing work, expect interruptions + ; Message to all users who come from + a host which has a name matching + *.edu. + +3.3.2 Notice + + Command: NOTICE + Parameters: + + The NOTICE command is used similarly to PRIVMSG. The difference + between NOTICE and PRIVMSG is that automatic replies MUST NEVER be + sent in response to a NOTICE message. This rule applies to servers + too - they MUST NOT send any error reply back to the client on + receipt of a notice. The object of this rule is to avoid loops + between clients automatically sending something in response to + something it received. + + This command is available to services as well as users. + + This is typically used by services, and automatons (clients with + either an AI or other interactive program controlling their actions). + + See PRIVMSG for more details on replies and examples. + +3.4 Server queries and commands + + The server query group of commands has been designed to return + information about any server which is connected to the network. + + In these queries, where a parameter appears as , wildcard + masks are usually valid. For each parameter, however, only one query + and set of replies is to be generated. In most cases, if a nickname + is given, it will mean the server to which the user is connected. + + These messages typically have little value for services, it is + therefore RECOMMENDED to forbid services from using them. + +3.4.1 Motd message + + Command: MOTD + Parameters: [ ] + + The MOTD command is used to get the "Message Of The Day" of the given + server, or current server if is omitted. + + Wildcards are allowed in the parameter. + + Numeric Replies: + RPL_MOTDSTART RPL_MOTD + RPL_ENDOFMOTD ERR_NOMOTD + +3.4.2 Lusers message + + Command: LUSERS + Parameters: [ [ ] ] + + The LUSERS command is used to get statistics about the size of the + IRC network. If no parameter is given, the reply will be about the + whole net. If a is specified, then the reply will only + concern the part of the network formed by the servers matching the + mask. Finally, if the parameter is specified, the request + is forwarded to that server which will generate the reply. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + RPL_LUSERCLIENT RPL_LUSEROP + RPL_LUSERUNKOWN RPL_LUSERCHANNELS + RPL_LUSERME ERR_NOSUCHSERVER + +3.4.3 Version message + + Command: VERSION + Parameters: [ ] + + The VERSION command is used to query the version of the server + program. An optional parameter is used to query the version + of the server program which a client is not directly connected to. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER RPL_VERSION + + Examples: + + VERSION tolsun.oulu.fi ; Command to check the version of + server "tolsun.oulu.fi". + +3.4.4 Stats message + + Command: STATS + Parameters: [ [ ] ] + + The stats command is used to query statistics of certain server. If + parameter is omitted, only the end of stats reply is sent + back. + + A query may be given for any single letter which is only checked by + the destination server and is otherwise passed on by intermediate + servers, ignored and unaltered. + + Wildcards are allowed in the parameter. + + Except for the ones below, the list of valid queries is + implementation dependent. The standard queries below SHOULD be + supported by the server: + + l - returns a list of the server's connections, showing how + long each connection has been established and the + traffic over that connection in Kbytes and messages for + each direction; + m - returns the usage count for each of commands supported + by the server; commands for which the usage count is + zero MAY be omitted; + o - returns a list of configured privileged users, + operators; + u - returns a string showing how long the server has been + up. + + It is also RECOMMENDED that client and server access configuration be + published this way. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_STATSLINKINFO RPL_STATSUPTIME + RPL_STATSCOMMANDS RPL_STATSOLINE + RPL_ENDOFSTATS + + Examples: + + STATS m ; Command to check the command usage + for the server you are connected to + +3.4.5 Links message + + Command: LINKS + Parameters: [ [ ] ] + + With LINKS, a user can list all servernames, which are known by the + server answering the query. The returned list of servers MUST match + the mask, or if no mask is given, the full list is returned. + + If is given in addition to , the LINKS + command is forwarded to the first server found that matches that name + (if any), and that server is then required to answer the query. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_LINKS RPL_ENDOFLINKS + + Examples: + + LINKS *.au ; Command to list all servers which + have a name that matches *.au; + + LINKS *.edu *.bu.edu ; Command to list servers matching + *.bu.edu as seen by the first server + matching *.edu. + +3.4.6 Time message + + Command: TIME + Parameters: [ ] + + The time command is used to query local time from the specified + server. If the parameter is not given, the server receiving + the command must reply to the query. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER RPL_TIME + + Examples: + TIME tolsun.oulu.fi ; check the time on the server + "tolson.oulu.fi" + +3.4.7 Connect message + + Command: CONNECT + Parameters: [ ] + + The CONNECT command can be used to request a server to try to + establish a new connection to another server immediately. CONNECT is + a privileged command and SHOULD be available only to IRC Operators. + If a is given and its mask doesn't match name of the + parsing server, the CONNECT attempt is sent to the first match of + remote server. Otherwise the CONNECT attempt is made by the server + processing the request. + + The server receiving a remote CONNECT command SHOULD generate a + WALLOPS message describing the source and target of the request. + + Numeric Replies: + + ERR_NOSUCHSERVER ERR_NOPRIVILEGES + ERR_NEEDMOREPARAMS + + Examples: + + CONNECT tolsun.oulu.fi 6667 ; Command to attempt to connect local + server to tolsun.oulu.fi on port 6667 + +3.4.8 Trace message + + Command: TRACE + Parameters: [ ] + + TRACE command is used to find the route to specific server and + information about its peers. Each server that processes this command + MUST report to the sender about it. The replies from pass-through + links form a chain, which shows route to destination. After sending + this reply back, the query MUST be sent to the next server until + given server is reached. + + TRACE command is used to find the route to specific server. Each + server that processes this message MUST tell the sender about it by + sending a reply indicating it is a pass-through link, forming a chain + of replies. After sending this reply back, it MUST then send the + TRACE message to the next server until given server is reached. If + the parameter is omitted, it is RECOMMENDED that TRACE + command sends a message to the sender telling which servers the local + server has direct connection to. + + If the destination given by is an actual server, the + destination server is REQUIRED to report all servers, services and + operators which are connected to it; if the command was issued by an + operator, the server MAY also report all users which are connected to + it. If the destination given by is a nickname, then only a + reply for that nickname is given. If the parameter is + omitted, it is RECOMMENDED that the TRACE command is parsed as + targeted to the processing server. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER + + If the TRACE message is destined for another server, all + intermediate servers must return a RPL_TRACELINK reply to indicate + that the TRACE passed through it and where it is going next. + + RPL_TRACELINK + + A TRACE reply may be composed of any number of the following + numeric replies. + + RPL_TRACECONNECTING RPL_TRACEHANDSHAKE + RPL_TRACEUNKNOWN RPL_TRACEOPERATOR + RPL_TRACEUSER RPL_TRACESERVER + RPL_TRACESERVICE RPL_TRACENEWTYPE + RPL_TRACECLASS RPL_TRACELOG + RPL_TRACEEND + + Examples: + + TRACE *.oulu.fi ; TRACE to a server matching + *.oulu.fi + +3.4.9 Admin command + + Command: ADMIN + Parameters: [ ] + + The admin command is used to find information about the administrator + of the given server, or current server if parameter is + omitted. Each server MUST have the ability to forward ADMIN messages + to other servers. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_ADMINME RPL_ADMINLOC1 + RPL_ADMINLOC2 RPL_ADMINEMAIL + + Examples: + + ADMIN tolsun.oulu.fi ; request an ADMIN reply from + tolsun.oulu.fi + + ADMIN syrk ; ADMIN request for the server to + which the user syrk is connected + +3.4.10 Info command + + Command: INFO + Parameters: [ ] + + The INFO command is REQUIRED to return information describing the + server: its version, when it was compiled, the patchlevel, when it + was started, and any other miscellaneous information which may be + considered to be relevant. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_INFO RPL_ENDOFINFO + + Examples: + + INFO csd.bu.edu ; request an INFO reply from + csd.bu.edu + + INFO Angel ; request info from the server that + Angel is connected to. + +3.5 Service Query and Commands + + The service query group of commands has been designed to return + information about any service which is connected to the network. + +3.5.1 Servlist message + + Command: SERVLIST + Parameters: [ [ ] ] + + The SERVLIST command is used to list services currently connected to + the network and visible to the user issuing the command. The + optional parameters may be used to restrict the result of the query + (to matching services names, and services type). + + Numeric Replies: + + RPL_SERVLIST RPL_SERVLISTEND + +3.5.2 Squery + + Command: SQUERY + Parameters: + + The SQUERY command is used similarly to PRIVMSG. The only difference + is that the recipient MUST be a service. This is the only way for a + text message to be delivered to a service. + + See PRIVMSG for more details on replies and example. + + Examples: + + SQUERY irchelp :HELP privmsg + ; Message to the service with + nickname irchelp. + + SQUERY dict@irc.fr :fr2en blaireau + ; Message to the service with name + dict@irc.fr. + +3.6 User based queries + + User queries are a group of commands which are primarily concerned + with finding details on a particular user or group users. When using + wildcards with any of these commands, if they match, they will only + return information on users who are 'visible' to you. The visibility + of a user is determined as a combination of the user's mode and the + common set of channels you are both on. + + Although services SHOULD NOT be using this class of message, they are + allowed to. + +3.6.1 Who query + + Command: WHO + Parameters: [ [ "o" ] ] + + The WHO command is used by a client to generate a query which returns + a list of information which 'matches' the parameter given by + the client. In the absence of the parameter, all visible + (users who aren't invisible (user mode +i) and who don't have a + common channel with the requesting client) are listed. The same + result can be achieved by using a of "0" or any wildcard which + will end up matching every visible user. + + The passed to WHO is matched against users' host, server, real + name and nickname if the channel cannot be found. + + If the "o" parameter is passed only operators are returned according + to the supplied. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_WHOREPLY RPL_ENDOFWHO + + Examples: + + WHO *.fi ; Command to list all users who match + against "*.fi". + + WHO jto* o ; Command to list all users with a + match against "jto*" if they are an + operator. + +3.6.2 Whois query + + Command: WHOIS + Parameters: [ ] *( "," ) + + This command is used to query information about particular user. + The server will answer this command with several numeric messages + indicating different statuses of each user which matches the mask (if + you are entitled to see them). If no wildcard is present in the + , any information about that nick which you are allowed to see + is presented. + + If the parameter is specified, it sends the query to a + specific server. It is useful if you want to know how long the user + in question has been idle as only local server (i.e., the server the + user is directly connected to) knows that information, while + everything else is globally known. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER ERR_NONICKNAMEGIVEN + RPL_WHOISUSER RPL_WHOISCHANNELS + RPL_WHOISCHANNELS RPL_WHOISSERVER + RPL_AWAY RPL_WHOISOPERATOR + RPL_WHOISIDLE ERR_NOSUCHNICK + RPL_ENDOFWHOIS + + Examples: + + WHOIS wiz ; return available user information + about nick WiZ + + WHOIS eff.org trillian ; ask server eff.org for user + information about trillian + +3.6.3 Whowas + + Command: WHOWAS + Parameters: *( "," ) [ [ ] ] + + Whowas asks for information about a nickname which no longer exists. + This may either be due to a nickname change or the user leaving IRC. + In response to this query, the server searches through its nickname + history, looking for any nicks which are lexically the same (no wild + card matching here). The history is searched backward, returning the + most recent entry first. If there are multiple entries, up to + replies will be returned (or all of them if no + parameter is given). If a non-positive number is passed as being + , then a full search is done. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NONICKNAMEGIVEN ERR_WASNOSUCHNICK + RPL_WHOWASUSER RPL_WHOISSERVER + RPL_ENDOFWHOWAS + + Examples: + + WHOWAS Wiz ; return all information in the nick + history about nick "WiZ"; + + WHOWAS Mermaid 9 ; return at most, the 9 most recent + entries in the nick history for + "Mermaid"; + + WHOWAS Trillian 1 *.edu ; return the most recent history for + "Trillian" from the first server + found to match "*.edu". + +3.7 Miscellaneous messages + + Messages in this category do not fit into any of the above categories + but are nonetheless still a part of and REQUIRED by the protocol. + +3.7.1 Kill message + + Command: KILL + Parameters: + + The KILL command is used to cause a client-server connection to be + closed by the server which has the actual connection. Servers + generate KILL messages on nickname collisions. It MAY also be + available available to users who have the operator status. + + Clients which have automatic reconnect algorithms effectively make + this command useless since the disconnection is only brief. It does + however break the flow of data and can be used to stop large amounts + of 'flooding' from abusive users or accidents. Abusive users usually + don't care as they will reconnect promptly and resume their abusive + behaviour. To prevent this command from being abused, any user may + elect to receive KILL messages generated for others to keep an 'eye' + on would be trouble spots. + + In an arena where nicknames are REQUIRED to be globally unique at all + times, KILL messages are sent whenever 'duplicates' are detected + (that is an attempt to register two users with the same nickname) in + the hope that both of them will disappear and only 1 reappear. + + When a client is removed as the result of a KILL message, the server + SHOULD add the nickname to the list of unavailable nicknames in an + attempt to avoid clients to reuse this name immediately which is + usually the pattern of abusive behaviour often leading to useless + "KILL loops". See the "IRC Server Protocol" document [IRC-SERVER] + for more information on this procedure. + + The comment given MUST reflect the actual reason for the KILL. For + server-generated KILLs it usually is made up of details concerning + the origins of the two conflicting nicknames. For users it is left + up to them to provide an adequate reason to satisfy others who see + it. To prevent/discourage fake KILLs from being generated to hide + the identify of the KILLer, the comment also shows a 'kill-path' + which is updated by each server it passes through, each prepending + its name to the path. + + Numeric Replies: + + ERR_NOPRIVILEGES ERR_NEEDMOREPARAMS + ERR_NOSUCHNICK ERR_CANTKILLSERVER + + NOTE: + It is RECOMMENDED that only Operators be allowed to kill other users + with KILL command. This command has been the subject of many + controversies over the years, and along with the above + recommendation, it is also widely recognized that not even operators + should be allowed to kill users on remote servers. + +3.7.2 Ping message + + Command: PING + Parameters: [ ] + + The PING command is used to test the presence of an active client or + server at the other end of the connection. Servers send a PING + message at regular intervals if no other activity detected coming + from a connection. If a connection fails to respond to a PING + message within a set amount of time, that connection is closed. A + PING message MAY be sent even if the connection is active. + + When a PING message is received, the appropriate PONG message MUST be + sent as reply to (server which sent the PING message out) + as soon as possible. If the parameter is specified, it + represents the target of the ping, and the message gets forwarded + there. + + Numeric Replies: + + ERR_NOORIGIN ERR_NOSUCHSERVER + + Examples: + + PING tolsun.oulu.fi ; Command to send a PING message to + server + + PING WiZ tolsun.oulu.fi ; Command from WiZ to send a PING + message to server "tolsun.oulu.fi" + + PING :irc.funet.fi ; Ping message sent by server + "irc.funet.fi" + +3.7.3 Pong message + + Command: PONG + Parameters: [ ] + + PONG message is a reply to ping message. If parameter is + given, this message MUST be forwarded to given target. The + parameter is the name of the entity who has responded to PING message + and generated this message. + + Numeric Replies: + + ERR_NOORIGIN ERR_NOSUCHSERVER + + Example: + + PONG csd.bu.edu tolsun.oulu.fi ; PONG message from csd.bu.edu to + tolsun.oulu.fi + +3.7.4 Error + + Command: ERROR + Parameters: + + The ERROR command is for use by servers when reporting a serious or + fatal error to its peers. It may also be sent from one server to + another but MUST NOT be accepted from any normal unknown clients. + + Only an ERROR message SHOULD be used for reporting errors which occur + with a server-to-server link. An ERROR message is sent to the server + at the other end (which reports it to appropriate local users and + logs) and to appropriate local users and logs. It is not to be + passed onto any other servers by a server if it is received from a + server. + + The ERROR message is also used before terminating a client + connection. + + When a server sends a received ERROR message to its operators, the + message SHOULD be encapsulated inside a NOTICE message, indicating + that the client was not responsible for the error. + + Numerics: + + None. + + Examples: + + ERROR :Server *.fi already exists ; ERROR message to the other server + which caused this error. + + NOTICE WiZ :ERROR from csd.bu.edu -- Server *.fi already exists + ; Same ERROR message as above but + sent to user WiZ on the other server. + +4. Optional features + + This section describes OPTIONAL messages. They are not required in a + working server implementation of the protocol described herein. In + the absence of the feature, an error reply message MUST be generated + or an unknown command error. If the message is destined for another + server to answer then it MUST be passed on (elementary parsing + REQUIRED) The allocated numerics for this are listed with the + messages below. + + From this section, only the USERHOST and ISON messages are available + to services. + +4.1 Away + + Command: AWAY + Parameters: [ ] + + With the AWAY command, clients can set an automatic reply string for + any PRIVMSG commands directed at them (not to a channel they are on). + The server sends an automatic reply to the client sending the PRIVMSG + command. The only replying server is the one to which the sending + client is connected to. + + The AWAY command is used either with one parameter, to set an AWAY + message, or with no parameters, to remove the AWAY message. + + Because of its high cost (memory and bandwidth wise), the AWAY + message SHOULD only be used for client-server communication. A + server MAY choose to silently ignore AWAY messages received from + other servers. To update the away status of a client across servers, + the user mode 'a' SHOULD be used instead. (See Section 3.1.5) + + Numeric Replies: + + RPL_UNAWAY RPL_NOWAWAY + + Example: + + AWAY :Gone to lunch. Back in 5 ; Command to set away message to + "Gone to lunch. Back in 5". + +4.2 Rehash message + + Command: REHASH + Parameters: None + + The rehash command is an administrative command which can be used by + an operator to force the server to re-read and process its + configuration file. + + Numeric Replies: + + RPL_REHASHING ERR_NOPRIVILEGES + + + Example: + + REHASH ; message from user with operator + status to server asking it to reread + its configuration file. + +4.3 Die message + + Command: DIE + Parameters: None + + An operator can use the DIE command to shutdown the server. This + message is optional since it may be viewed as a risk to allow + arbitrary people to connect to a server as an operator and execute + this command. + + The DIE command MUST always be fully processed by the server to which + the sending client is connected and MUST NOT be passed onto other + connected servers. + + Numeric Replies: + + ERR_NOPRIVILEGES + + Example: + + DIE ; no parameters required. + +4.4 Restart message + + Command: RESTART + Parameters: None + + An operator can use the restart command to force the server to + restart itself. This message is optional since it may be viewed as a + risk to allow arbitrary people to connect to a server as an operator + and execute this command, causing (at least) a disruption to service. + + The RESTART command MUST always be fully processed by the server to + which the sending client is connected and MUST NOT be passed onto + other connected servers. + + Numeric Replies: + + ERR_NOPRIVILEGES + + Example: + + RESTART ; no parameters required. + +4.5 Summon message + + Command: SUMMON + Parameters: [ [ ] ] + + The SUMMON command can be used to give users who are on a host + running an IRC server a message asking them to please join IRC. This + message is only sent if the target server (a) has SUMMON enabled, (b) + the user is logged in and (c) the server process can write to the + user's tty (or similar). + + If no parameter is given it tries to summon from the + server the client is connected to is assumed as the target. + + If summon is not enabled in a server, it MUST return the + ERR_SUMMONDISABLED numeric. + + Numeric Replies: + + ERR_NORECIPIENT ERR_FILEERROR + ERR_NOLOGIN ERR_NOSUCHSERVER + ERR_SUMMONDISABLED RPL_SUMMONING + + Examples: + + SUMMON jto ; summon user jto on the server's + host + + SUMMON jto tolsun.oulu.fi ; summon user jto on the host which a + server named "tolsun.oulu.fi" is + running. + +4.6 Users + + Command: USERS + Parameters: [ ] + + The USERS command returns a list of users logged into the server in a + format similar to the UNIX commands who(1), rusers(1) and finger(1). + If disabled, the correct numeric MUST be returned to indicate this. + + Because of the security implications of such a command, it SHOULD be + disabled by default in server implementations. Enabling it SHOULD + require recompiling the server or some equivalent change rather than + simply toggling an option and restarting the server. The procedure + to enable this command SHOULD also include suitable large comments. + + Numeric Replies: + + ERR_NOSUCHSERVER ERR_FILEERROR + RPL_USERSSTART RPL_USERS + RPL_NOUSERS RPL_ENDOFUSERS + ERR_USERSDISABLED + + Disabled Reply: + + ERR_USERSDISABLED + + Example: + + USERS eff.org ; request a list of users logged in + on server eff.org + +4.7 Operwall message + + Command: WALLOPS + Parameters: + + The WALLOPS command is used to send a message to all currently + connected users who have set the 'w' user mode for themselves. (See + Section 3.1.5 "User modes"). + + After implementing WALLOPS as a user command it was found that it was + often and commonly abused as a means of sending a message to a lot of + people. Due to this, it is RECOMMENDED that the implementation of + WALLOPS allows and recognizes only servers as the originators of + WALLOPS. + + Numeric Replies: + + ERR_NEEDMOREPARAMS + + Example: + + :csd.bu.edu WALLOPS :Connect '*.uiuc.edu 6667' from Joshua ; WALLOPS + message from csd.bu.edu announcing a + CONNECT message it received from + Joshua and acted upon. + +4.8 Userhost message + + Command: USERHOST + Parameters: *( SPACE ) + + The USERHOST command takes a list of up to 5 nicknames, each + separated by a space character and returns a list of information + about each nickname that it found. The returned list has each reply + separated by a space. + + Numeric Replies: + + RPL_USERHOST ERR_NEEDMOREPARAMS + + Example: + + USERHOST Wiz Michael syrk ; USERHOST request for information on + nicks "Wiz", "Michael", and "syrk" + + :ircd.stealth.net 302 yournick :syrk=+syrk@millennium.stealth.net + ; Reply for user syrk + +4.9 Ison message + + Command: ISON + Parameters: *( SPACE ) + + The ISON command was implemented to provide a quick and efficient + means to get a response about whether a given nickname was currently + on IRC. ISON only takes one (1) type of parameter: a space-separated + list of nicks. For each nickname in the list that is present, the + server adds that to its reply string. Thus the reply string may + return empty (none of the given nicks are present), an exact copy of + the parameter string (all of them present) or any other subset of the + set of nicks given in the parameter. The only limit on the number of + nicks that may be checked is that the combined length MUST NOT be too + large as to cause the server to chop it off so it fits in 512 + characters. + + ISON is only processed by the server local to the client sending the + command and thus not passed onto other servers for further + processing. + + Numeric Replies: + + RPL_ISON ERR_NEEDMOREPARAMS + + Example: + + ISON phone trillian WiZ jarlek Avalon Angel Monstah syrk + ; Sample ISON request for 7 nicks. -- cgit v1.2.3